레이싱심 핸드브레이크

레이싱 게임을 하기 위하여 핸드브레이크가 모자라던 참에 좋은 싱기버스 모델을 찾아 만들어보았다. 

CLASSIC DIY HANDBRAKE 3D PRINTED

This is a classic handbrake designed by me and inspired by the most common analogue handbrake that can be found online for 60/90 euros.

It is completely printable with a 3D printer and uses an Arduino Leonardo, a potentiometer, a spring of about 40mm in length and two ball bearings to safely reach a personalized adjustment of the working stroke. Online it is possible to find the codes for the programming of the Arduino Leonardo card through the various tutorials of similar hand brakes.

I thank with all my heart those who put the likes to the project, I did not want to put it on payment because the 3D printing community has always made available many very interesting projects especially in the simracing and so I wanted to reciprocate with this handbrake, I hope you like it .

CLASSIC DIY HANDBRAKE 3D PRINTED

This is a classic handbrake designed by me and inspired by the most common analogue handbrake that can be found online for 60/90 euros.

It is completely printable with a 3D printer and uses an Arduino Leonardo, a potentiometer, a spring of about 40mm in length and two ball bearings to safely reach a personalized adjustment of the working stroke. Online you can find the codes for programming the Arduino Leonardo board through the various similar handbrake tutorials.

List:

Arduino Leonardo pro micro ATmega32u4 5V / 16MHz x1pcs

linear potentiometer B10K 10K Ohm x1pcs

ball bearings double steel shield 8mmx16mmx5mm X2pcs

Bolts M8x80 x1pcs

Bolts M8x30 x5pcs

Bolt M8x50 x1pcs

Nuts M8 x6pcs

washer for M8 bolts x1pcs

Compression spring League steel 41.5mm x 13.75mm, 2.31N / mm x1pcs but you can also choose a more powerful spring as long as they remain of the same size

Mini disc magnets 6mmx1mm x4pcs

NO ONE IS ALLOWED TO RECHARGE THIS MODEL OR MODIFY IT, ALL RIGHTS ARE RESERVED TO ME.

CC - ATTRIBUTION - NO COMMERCIAL - NO DERIVATIVES

<모델>

https://www.thingiverse.com/thing:3838854

<BOM 구매처>

*아두이노 레오나르도 마이크로와, 가변저항은 자체 구매

https://smartstore.naver.com/bolt114/products/2809862041

https://smartstore.naver.com/bolt114/products/3421774880

https://smartstore.naver.com/partnersp0001/products/3074078419

*자석은 아두이노 고정용임.